Siemens SINUMERIK 840D sl Operating Manual page 225

Additional useful notes
HMI-Adv/DH
Archive/PLC
NCU
Operate
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
An error-tolerant procedure is used for delete operations as well as when
navigating.
A check is first made as to whether the name corresponds to a data man‐
agement name. If this is the case, then the system uses the information from
data management. Otherwise, a check is made as to whether this name
exists at the operating system level and is not assigned to another data
management entry. If this is the case, then the system uses the information
from the operating system.
To delete PLC blocks, these must be specified in the archive name conven‐
tion.
The naming convention has the format: TTNNNNN, whereby TT stands for
the hexadecimal type, and NNNNN for the decimal number of the block. When
necessary, both should be filled up with leading zeros to obtain 2 or 5 posi‐
tions respectively.
PLC block types:
08 - OB
0A - DB
0B - SDB
0C - FC
0E - FB
In contrast to Windows, the file system used on the NCU differentiates be‐
tween upper and lower case.
For the "Operate" target area, create the "All", "NCU" or "PCU" folders using
known folders. This folder defines for which SINUMERIK Operate the tasks
are to be processed.
Under this folder, you define the path to the files to be deleted.
The tasks stored under "All" are processed on the NCU and on the PCU.
The tasks stored under the other two folders are only processed on the
associated system.
Create MyConfig - Expert
4.5 Component editor
Organization block
Data block
System data block
Function
Function block
225