Siemens SINUMERIK 840D sl Operating Manual page 76

Create MyConfig - Diff
3.5 File comparison
⑤
⑥
Two typical comparison configurations for SINUMERIK are subsequently shown and their
comparison results as example.
Comment tab
Any comments on the selected comparison configuration can be saved under the Comment
tab.
76
In addition, with lines for which the definitions
to set how the system handles lines that are not identical, but similar when it comes to aligning
them. This means it is defined as to whether similar lines, depending on the degree of similarity,
are shown offset to one another (green and blue arrow) or next to one another (red unequal
symbol).
This diagram should symbolically explain how the slider functions.
③ ④
and do not apply, this slider can be used
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD