Create MyConfig - Expert
4.4 Project folder
Redo()*
In the automatic sequence behaves differently than in the manual sequence.
Redo() results in cancellation in the automatic sequence.
Redo() should preferably be used in the dialogs in event "OnNext" to monitor manual entries.
Skip()**
Skip() immediately jumps to the next dialog.
The current dialog page is thus no longer processed.
Figure 4-8
Executing dialog pages - schematic overview
118
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD