Editing A Password List - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.10 Password protection
Access levels
Access level
"Read project"
"Change project"
"Full access to project"
4.10.2.2

Editing a password list

Requirement
You already define the password protection when you create a project on the Package tab
under Project - General > Access (Page 106).
To make changes at a later time, e.g. activate password protection or manage the password
list, use the main menu in Expert: "Project > Password protection > Edit password list...". The
dialog "Edit password list [Rights without a password]" is opened.
If there is already password protection, then you will be initially asked to enter the password
for "Full access".
By default, when creating a new project or an external component, an entry <Rights without
password> will be created with the following authorizations:
Figure 4-108 Edit password list [Rights without a password]
312
Authorizations
● Opening a project/component for reading
● Opening a project/component for reading
● Changing and saving a project/component
● Opening a project/component for reading
● Changing and saving a project/component
● Editing a project/component password list -
transfer password list to components
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD