Delete - Siemens SINUMERIK 840D sl Operating Manual

NCU/Linux
4.5.4

Delete

Delete action
The "Delete" action allows files and folders to be deleted in the target area.
You can create the paths in which the files and folders to be deleted are located on the nodes
in the target area. This is supported by the "Known folder" context menu entry.
Target areas that do not contain any delete tasks are shown in gray, while inserted inadmissible
folders are shown in red.
Note
Selected data areas define target areas
Which target areas are displayed depends on the data areas (archive, PCU, NCU) that were
activated for use.
The data areas are defined in the project folder in the Package tab (Page 106).
If a data area is subsequently deactivated, then all of the target area nodes that cannot be
hidden due to content are shown in red.
Note
Display of the target area
● Gray - target area does not contain any data.
● Red - data inserted in the target area is not permissible.
● Blue - linked data with resolution for deployment.
The following target areas are supported:
Archive
NCU
PCU 50 (Windows
XP)
PCU 50 (Windows 7)
Operate
HMI-Adv (F:)
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
With shell scripts (sh) for Linux, it must be ensured that data is saved in the Unix
file format, but only LF not CR/LF.
The shell ID (e.g. #!/bin/sh) must be located in the first line – or the script
should be started using a shell command (e.g. sh my_script.sh).
A shell should be used as a prefix if you wish to specify commands directly with
place holder or environment variables (e.g.: sh rm /user/*.log). If a file is
specified for execution, './' should be used as a prefix (e.g.: ./test.sh).
Archive image
Root of the NCU
Drives/shares of the PCU
Folder of SINUMERIK Operate
HMI-Advanced drive
Create MyConfig - Expert
4.5 Component editor
NC, MMC, PLC, CP, DRV
card, user, oem, addon
C:, D:, E:, F:
C:, D:
hmisl or card
DH (data management), USER,
OEM, ADD_ON
223