Command Line Call - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Diff

3.7 Command line call

The configurations available in the file are displayed and grouped according to application
areas.
①
②
③
The "Import" button transfers the selected configuration to Diff.
If a configuration is to be transferred to Diff, for which a configuration with the same name
already exists in Diff, then you are prompted as to whether the existing configuration should
be overwritten.
3.7 Command line call
To be able to use Diff via the shortcut menu, e.g. in Windows Explorer, Diff has been provided
with switches which, in turn, allow Diff to be called via the command line.
Call
The command subsequently shown and all switches and arguments that are used must be
written in one line to a batch file or a command line interface.
82
Activating or deactivating a group node means that this action is accepted for all con‐
figurations of the group.
By activating the individual configurations, for each configuration you can define wheth‐
er this should be imported.
Group nodes are shown in gray if there is no configuration for the group in the file.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD