Step Tree (Package Execution) - Siemens SINUMERIK 840D sl Operating Manual

The following settings are available for "Archive":
Create before step tree
Create after step tree
Dialog scripts
Under "Dialog scripts", entry "Scripts", via the button
event scripts".
You can edit scripts here that are to be executed at selectable times during package execution.
You can find detailed information on the dialog scripts in the section with the same name
"Dialog scripts (Page 115)".
You can find an example of the dialog scripts for the step tree in "Examples of scripts in dialog
pages (Page 119)".
4.4.2.35

Step tree (package execution)

Dialog view during package execution (for commissioning engineers / operators)
On the dialog page, the operator can activate or deactivate interactive steps. The information
for the selected step is displayed at the bottom in the yellow field and makes it easier for the
operator to understand.
You will find additional information on package execution in the section under Package
execution (Page 317).
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Yes Here, you specify whether an archive with the NC, PLC and DRV areas is to
be created before the execution of the step tree.
No
The backup is performed for the NC area with the setting that all data is to be
saved.
With the setting "Yes", the archive is saved with the name 'StepBegin_<Da‐
tum>.arc'.
The archive is stored in the folder based on the name of the CF card ID which
is located next to the package after the package execution.
Yes Here, you specify whether an archive with the NC, PLC and DRV areas is to
be created after the execution of the step tree.
No
The backup is performed for the NC area with the setting that all data is to be
saved.
With the setting "Yes", the archive is saved with the name 'StepEnd_<Da‐
tum>.arc'.
The archive is stored in the folder based on the name of the CF card ID which
is located next to the package after the package execution.
Create MyConfig - Expert
4.4 Project folder
you open the "Dialog 'Step tree' Edit
187