Siemens SINUMERIK 840D sl Operating Manual page 38

Create MyConfig - Diff
3.3 SINUMERIK archive comparison
Example 1: Copying SINAMICS data
Using the context menu entries "Copy" or "Data Export to File", you can transfer the selected
values and their identifiers to the clipboard or to a file.
For the selection shown, the following content is obtained for the clipboard or file:
[B3_S3_PS3] ;V2.40.43.00
p45=1
p100=0
p105=1
A section with the information about the data source is provided in the first line. This information
is saved in a format that is in conformance with Expert, so that it can be used in a manipulation
jobs as "Data target" for the following values. The SINAMICS version – from which the following
data comes – is saved after the section, separated by a semicolon.
The value assignments in the form identifier=value are located in lines 2 to n.
38
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD