Dialog scripts
Under "Dialog scripts", entry "Scripts", via the button
Edit event scripts". Here you can edit scripts that are to be executed at selectable times during
package processing.
You can find detailed information on the dialog scripts in the section with the same name
"Dialog scripts (Page 115)".
You can find an example for the dialog scripts for the CNC software in "Examples of scripts in
dialog pages (Page 119)".
4.4.2.23
CNC software (package execution)
Dialog view during the package execution (for commissioning engineers / operators)
The "CNC software" dialog box is used for installation of new CNC software or for upgrading
existing CNC software.
You will find additional information on package execution in the section under Package
execution (Page 317).
Figure 4-28
Using the "CNC software (*.tgz)" drop-down list, a file that was assigned to the package or a
file lying next to the package (prefix: "./") can be selected.
The "Browse" button allows a selection to be made from any location.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
CNC software - commissioning engineer / operator view
Create MyConfig - Expert
4.4 Project folder
you open the "Dialog 'CNC software'
157