Siemens SINUMERIK 840D sl Operating Manual page 94

Create MyConfig - Expert
4.2 Introduction
①
Main menus and toolbars
②
Project folder
③
Component editor and freely available working area
④
Dockable window with the tabs Verification, Cross references, and Source explorer
Figure 4-1 Default setting of the Expert interface
User-friendly Expert interface
To a certain extend, you can adapt the Expert interface to your requirements. When opening
Expert for the first time, the dockable window with the tabs Verification, Cross references, and
Source explorer is displayed in the bottom area of the Expert interface. Just like the project
folder or the component editor, the size of this window can be changed.
The entire dockable window or even the individual tabs can be moved to a different point of
the interface and docked or even moved to a position outside of the interface, e.g. to a second
monitor, by pressing and holding the title bar or the tab.
94
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD