Siemens SINUMERIK 840D sl Operating Manual page 212

Create MyConfig - Expert
4.4 Project folder
Figure 4-55
3. The inserted blue link step has allocated in the MP an additional step property "ID
namespace" and a step configuration property "Managing in the".
The values of both properties are assigned a standard default value, which you can change.
These properties, which can only exist in the MP, are accepted for all gray steps below the
link step, and displayed for these. However, they can only be changed on the blue link step.
212
Insert link step
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD