Siemens SINUMERIK 840D sl Operating Manual page 332

Create MyConfig - Expert
4.11 Package execution
The operations of two responses were obtained in channel 1:
● checked:
The value of the 1st machine data is listed as being checked, as the old value already
corresponded to the new required value.
Old and new values are also listed. The package did not change any data here.
Information checked is only displayed if button Details on is activated.
● changed:
The value for $MA_MAX_AX_VELO[AX1] was changed; the old and the new values are
displayed.
The operations of the following responses were obtained in channel 2:
● deleted:
Machine data $MC_AXCONF_GEOAX_NAME_TAB[2] was deleted; the old value and the
operation to delete are displayed.
● not exists:
The variable to be deleted was not deleted as it does not exist.
● inserted:
The variable was inserted with the required value, i.e. created.
Before this operation, the variable was not available.
● checked:
It was identified that this value was already available as old value for
$MC_AXCONF_GEOAX_NAME_TAB[2].
Information checked is only displayed if button Details on is activated.
The external component ./DescLogBook/EC1 in the project has no content or did not initiate
any actions. Just like the internal component, the external component is also part of the
package.
Step 3 Step 3 [3]
Here, a step script is shown as example. The step scripts are always saved for an event time
OnProc.
In this case, a message is output that was acknowledged by the user with "ok".
In this case, a message is output that was acknowledged by the user with "continue".
332
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD