Zuld Configuration - ZyXEL Communications XGS2210-28 User Manual

Table 172 Advanced Application > ZULD Status (continued)
LABEL
Remote MAC Addr
Remote Port

39.3 ZULD Configuration

Use this screen to enable ZULD on a port, configure a mode and set the probe time. To open this screen,
click Advanced Application > ZULD > Configuration.
Figure 303 Advanced Application > ZULD > Configuration (Standalone mode)
Chapter 39 ZULD
DESCRIPTION
This is the MAC address of the port on the connected device to which the port of the Switch
is connected.
This is the port number of the port on the connected device to which the port of the Switch is
connected.
XGS2210 Series User's Guide
393