ZyXEL Communications XGS2210-28 User Manual page 192

Figure 149 Advanced Application > Port Authentication > 802.1x (Stacking mode)
The following table describes the labels in this screen.
Table 74 Advanced Application > Port Authentication > 802.1x
LABEL DESCRIPTION
Active Select this check box to permit 802.1x authentication on the Switch.
Note: You must first enable 802.1x authentication on the Switch before configuring it
Slot (Stacking This field appears only in stacking mode. Click the drop-down list to choose the slot number of
mode) the Switch in a stack.
Port (Standalone This field displays the port number. In stacking mode, the first number is the slot ID and the
or stacking second is the port number. * means all ports.
mode)
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this to permit 802.1x authentication on this port. You must first allow 802.1x
authentication on the Switch before configuring it on each port.
Chapter 18 Port Authentication
on each port.
XGS2210 Series User's Guide
192