Dhcp Snooping Configure - ZyXEL Communications XGS2210-28 User Manual

Table 110 Advanced Application > IP Source Guard > IPv4 Source Guard Setup > DHCP Snooping
LABEL
Invalid interfaces
Parse failures
Expired leases
Unsupported vlans
Last ignored time
Total ignored bindings
counters
Binding collisions
Invalid interfaces
Parse failures
Expired leases
Unsupported vlans

26.6 DHCP Snooping Configure

Use this screen to enable DHCP snooping on the Switch (not on specific VLAN), specify the VLAN where
the default DHCP server is located, and configure the DHCP snooping database. The DHCP snooping
database stores the current bindings on a secure, external TFTP server so that they are still available after
a restart. To open this screen, click Advanced Application > IP Source Guard > IPv4 Source Guard Setup
> DHCP Snooping > Configure.
Chapter 26 IP Source Guard
DESCRIPTION
This field displays the number of bindings the Switch ignored because the port number
was a trusted interface or does not exist anymore.
This field displays the number of bindings the Switch ignored because the Switch was
unable to understand the binding in the DHCP binding database.
This field displays the number of bindings the Switch ignored because the lease time
had already expired.
This field displays the number of bindings the Switch ignored because the VLAN ID does
not exist anymore.
This field displays the last time the Switch ignored any bindings for any reason from the
DHCP binding database.
This section displays the reasons the Switch has ignored bindings any time it read
bindings from the DHCP binding database. You can clear these counters by restarting
the Switch or using CLI commands. See the CLI Reference Guide.
This field displays the number of bindings the Switch has ignored because the Switch
already had a binding with the same MAC address and VLAN ID.
This field displays the number of bindings the Switch has ignored because the port
number was a trusted interface or does not exist anymore.
This field displays the number of bindings the Switch has ignored because the Switch
was unable to understand the binding in the DHCP binding database.
This field displays the number of bindings the Switch has ignored because the lease
time had already expired.
This field displays the number of bindings the Switch has ignored because the VLAN ID
does not exist anymore.
XGS2210 Series User's Guide
269