ZyXEL Communications XGS2210-28 User Manual page 50

Access the Switch through http://192.168.1.1 by default. Log into the Switch by entering the username
1
(default: admin) and password (default: 1234).
Go to Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup, and create a VLAN with
2
ID of 100. Add ports 5, 6 and 7 in the VLAN by selecting Fixed in the Control field as shown.
Deselect Tx Tagging because you don't want outgoing traffic to contain this VLAN tag.
Click Add.
Figure 30 Tutorial: Create a VLAN and Add Ports to It
Go to Advanced Application > VLAN > VLAN Configuration > VLAN Port Setup, and set the PVID of the
3
ports 5, 6 and 7 to 100. This tags untagged incoming frames on ports 5, 6 and 7 with the tag 100.
Chapter 6 Tutorials
XGS2210 Series User's Guide
50