ZyXEL Communications XGS2210-28 User Manual page 76

Figure 55 Basic Setting > Port Setup (Stacking mode)
The following table describes the labels in this screen.
Table 19 Basic Setting > Port Setup
LABEL DESCRIPTION
Slot (Stacking This field appears only in stacking mode. Click the drop-down list to choose the slot number of the
mode) Switch in a stack.
Port This is the port index number. In stacking mode, the first number is the slot ID and the second is the
port number. * means all ports.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to enable a port. The factory default for all ports is enabled. A port must be
enabled for data transmission to occur.
Name Enter a descriptive name that identifies this port. You can enter up to 64 alpha-numerical
characters.
Note: Due to space limitation, the port name may be truncated in some web
configurator screens.
Type This field displays the capacity that the port can support.
Chapter 8 Basic Setting
XGS2210 Series User's Guide
76