ZyXEL Communications XGS2210-28 User Manual page 79

Figure 58 Basic Setting > PoE Setup (Stacking mode)
The following table describes the labels in this screen.
Table 20 Basic Setting > PoE Status
LABEL DESCRIPTION
PoE Status
Slot (Stacking This field appears only in stacking mode. Click the drop-down list to choose the slot number of
mode) the Switch in a stack.
PoE Mode This field displays the power management mode used by the Switch, whether it is in
Classification or Consumption mode.
Total Power (W) This field displays the total power the Switch can provide to the connected PoE-enabled
devices on the PoE ports.
Consuming This field displays the amount of power the Switch is currently supplying to the connected PoE-
Power (W) enabled devices.
Allocated Power This field displays the total amount of power the Switch has reserved for PoE after negotiating
(W) with the connected PoE device(s).
Consuming Power (W) can be less than or equal but not more than the Allocated Power (W).
Remaining This field displays the amount of power the Switch can still provide for PoE.
Power (W)
Note: The Switch must have at least 16 W of remaining power in order to supply
power to a PoE device, even if the PoE device needs less than 16W.
Port (Standalone This is the port index number. In stacking mode, the first number represents the slot and the
and stacking second the port number.
mode)
Chapter 8 Basic Setting
XGS2210 Series User's Guide
79