Configuring Dhcp Vlan Settings - ZyXEL Communications XGS2210-28 User Manual

Figure 319 Global DHCP Relay Network Example
Configure the DHCP Relay screen as shown. Make sure you select a DHCP option 82 profile (default1 in
this example) to set the Switch to send additional information (such as the VLAN ID) together with the
DHCP requests to the DHCP server. This allows the DHCP server to assign the appropriate IP address
according to the VLAN ID.
Figure 320 DHCP Relay Configuration Example

42.4.6 Configuring DHCP VLAN Settings

Use this screen to configure your DHCP settings based on the VLAN domain of the DHCP clients. Click IP
Application > DHCP > DHCPv4 in the navigation panel, then click the VLAN link In the DHCP Status screen
that displays.
Note: You must set up a management IP address for each VLAN that you want to configure
DHCP settings for on the Switch. See
do this.
Chapter 42 DHCP
Section 5.2 on page 47
XGS2210 Series User's Guide
412
EXAMPLE
for information on how to