ZyXEL Communications XGS2210-28 User Manual page 413

Xgs2210 series. intelligent layer 2 gbe switch
Table of Contents

Advertisement

Figure 321 IP Application > DHCP > DHCPv4 > VLAN
The following table describes the labels in this screen.
Table 187 IP Application > DHCP > DHCPv4 > VLAN
LABEL
DESCRIPTION
VID
Enter the ID number of the VLAN to which these DHCP settings apply.
Relay
Use this section if you want to configure the Switch to function as a DHCP relay for this VLAN.
Remote DHCP
Enter the IP address of a DHCP server in dotted decimal notation.
Server 1 .. 3
Source Address
Enter the source IP address that the Switch adds to DHCP requests from clients on this VLAN
before forwarding them. If you leave this field set to 0.0.0.0, the Switch automatically sets the
source IP address of the DHCP requests to the IP address of the interface on which the packet is
received.
The source IP address helps DHCP clients obtain an appropriate IP address when you configure
multiple routing domains on a VLAN.
Option 82 Profile
Select a pre-defined DHCP option 82 profile that the Switch applies to all ports in this VLAN. The
Switch adds the Circuit ID sub-option and/or Remote ID sub-option specified in the profile to
DHCP requests that it relays to a DHCP server.
Add
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Clear
Click Clear to reset the fields to the factory defaults.
VID
This field displays the ID number of the VLAN group to which this DHCP settings apply.
Type
This field displays Relay for the DHCP mode.
DHCP Status
For DHCP server configuration, this field displays the starting IP address and the size of the IP
address pool.
For DHCP relay configuration, this field displays the first remote DHCP server IP address.
Source Address
This field displays the source IP address you configured for DHCP requests from clients on this
VLAN.
Chapter 42 DHCP
XGS2210 Series User's Guide
413

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents