Oam Details - ZyXEL Communications XGS2210-28 User Manual

The following table describes the labels in this screen.
Table 168 Advanced Application > OAM Status
LABEL
Slot (Stacking
mode)
Local
This section displays information about the ports on the Switch.
Port
Mode
Remote
This section displays information about the remote device.
Mac Address
OUI
Mode
Config

38.2.1 OAM Details

Use this screen to view OAM configuration details and operational status of a specific port. Click a
number in the Port column in the OAM Status screen to display the screen as shown next.
DESCRIPTION
This field appears only in stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
This field displays the number of the port on the Switch. In stacking mode, the first box field is
the slot ID and the second field is the port number.
This field displays the operational state of the port when OAM is enabled on the port.
Active - Allows the port to issue and respond to Ethernet OAM commands.
Passive - Allows the port to respond to Ethernet OAM commands.
This field displays the MAC address of the remote device.
This field displays the OUI (first three bytes of the MAC address) of the remote device.
This field displays the operational state of the port when OAM is enabled on the port.
Active - Allows the port to issue and respond to Ethernet OAM commands.
Passive - Allows the port to respond to Ethernet OAM commands.
This field displays the capabilities of the Switch and remote device.
XGS2210 Series User's Guide
382