Configuring Dhcpv4 Global Relay - ZyXEL Communications XGS2210-28 User Manual

The following table describes the labels in this screen.
Table 184 IP Application > DHCP > DHCPv4 > Option 82 Profile
LABEL
Name
Circuit-ID
Enable
slot-port
vlan
hostname
string
Remote-ID
Enable
mac
string
Add
Cancel
Profile Name
Circuit-ID
Enable
Field
Remote-ID
Enable
Field
Delete
Cancel

42.4.3 Configuring DHCPv4 Global Relay

Use this screen to configure global DHCPv4 relay. Click IP Application > DHCP > DHCPv4 in the
navigation panel and click the Global link to display the screen as shown.
Chapter 42 DHCP
DESCRIPTION
Enter a descriptive name for the profile for identification purposes. You can use up to 32 ASCII
characters. Spaces are allowed.
Use this section to configure the Circuit ID sub-option to include information that is specific to
the relay agent (the Switch).
Select this option to have the Switch add the Circuit ID sub-option to client DHCP requests that it
relays to a DHCP server.
Select this option to have the Switch add the number of port that the DHCP client is connected
to.
Select this option to have the Switch add the ID of VLAN which the port belongs to.
This is the system name you configure in the Basic Setting > General Setup screen.
Select this option for the Switch to add the system name to the client DHCP requests that it
relays to a DHCP server.
Enter a string of up to 64 ASCII characters that the Switch adds into the client DHCP requests.
Spaces are allowed.
Use this section to configure the Remote ID sub-option to include information that identifies the
relay agent (the Switch).
Select this option to have the Switch append the Remote ID sub-option to the option 82 field of
DHCP requests.
Select this option to have the Switch add its MAC address to the client DHCP requests that it
relays to a DHCP server.
Enter a string of up to 64 ASCII characters for the remote ID information in this field. Spaces are
allowed.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to their last saved values.
This field displays the descriptive name of the profile. Click the name to change the settings.
This field displays whether the Circuit ID sub-option is added to client DHCP requests.
This field displays the information that is included in the Circuit ID sub-option.
This field displays whether the Remote ID sub-option is added to client DHCP requests.
This field displays the information that is included in the Remote ID sub-option.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Check the entry(ies) that you want to remove and then click the Delete button.
Click Cancel to clear the selected check box(es).
XGS2210 Series User's Guide
409