Dhcp Configuration; Dhcpv4 Status - ZyXEL Communications XGS2210-28 User Manual

42.2 DHCP Configuration

Click IP Application > DHCP in the navigation panel to display the screen as shown. Click the link next to
DHCPv4 to open screens where you can enable and configure DHCPv4 relay settings and create option
82 profiles. Click the link next to DHCPv6 to open a screen where you can configure DHCPv6 relay
settings.
Figure 314 IP Application > DHCP

42.3 DHCPv4 Status

Click IP Application > DHCP > DHCPv4 in the navigation panel. The DHCP Status screen displays.
Figure 315 IP Application > DHCP > DHCPv4
The following table describes the labels in this screen.
Table 179 IP Application > DHCP > DHCPv4
LABEL DESCRIPTION
Relay This section displays configuration settings related to the Switch's DHCP relay mode.
Status
Relay This field displays:
Mode
None - if the Switch is not configured as a DHCP relay agent.
Global - if the Switch is configured as a DHCP relay agent only.
VLAN - followed by a VLAN ID or multiple VLAN IDs if it is configured as a relay agent for specific
VLAN(s).
VID This field displays the ID number of the VLAN for which the Switch acts as a DHCP relay agent.
Current This field displays the source IP address of the DHCP requests that the Switch forwards to a DHCP server.
Source
Address
Chapter 42 DHCP
XGS2210 Series User's Guide
406