ZyXEL Communications XGS2210-28 User Manual page 300

Figure 229 Advanced Application > Loop Guard (Stacking mode)
The following table describes the labels in this screen.
Table 128 Advanced Application > Loop Guard
LABEL DESCRIPTION
Active Select this option to enable loop guard on the Switch.
The Switch generates syslog, internal log messages as well as SNMP traps when it shuts down a
port via the loop guard feature.
Slot (Stacking This field appears only in stacking mode. Click the drop-down list to choose the slot number of
mode) the Switch in a stack.
Port This field displays the port number. In stacking mode, the first number is the slot ID and the
(Standalone or second is the port number. * means all ports.
stacking mode)
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Chapter 27 Loop Guard
XGS2210 Series User's Guide
300