ZyXEL Communications XGS2210-28 User Manual page 425

Figure 332 Management > Maintenance (Stacking mode)
The following table describes the labels in this screen.
Table 192 Management > Maintenance
LABEL DESCRIPTION
Current This field displays which configuration (Configuration 1 or Configuration 2) is currently operating
on the Switch.
Firmware Click Click Here to go to the Firmware Upgrade screen.
Upgrade
Restore Click Click Here to go to the Restore Configuration screen.
Configuration
Backup Click Click Here to go to the Backup Configuration screen.
Configuration
Erase Running- Click Click Here to reset the current configuration of the Switch. Note that this will not reset the
Configuration configuration to the factory default settings.
Save Click Config 1 to save the current configuration settings to Configuration 1 on the Switch.
Configuration
Click Config 2 to save the current configuration settings to Configuration 2 on the Switch.
Click Custom Default to save the current configuration settings to a custom default file on the
Switch.
Reboot System Click Config 1 to reboot the system and load Configuration 1 on the Switch.
Click Config 2 to reboot the system and load Configuration 2 on the Switch.
Click Stacking Default to reboot the system and load stacking configurations on the Switch.
Click Factory Default to reboot the system and load the default configuration settings on the
Switch.
Click Custom Default to reboot the system and load a saved Custom Default configuration file
on the Switch. This will save the custom default configuration settings to both Configuration 1
and Configuration 2. If a Custom Default configuration file was not saved, clicking Custom
Default loads the factory default configuration on the Switch.
Note: Make sure to click the Save button in any screen to save your settings to the
Tech-Support Click Click Here to see the Tech-Support screen. You can set CPU and memory thresholds for
log reports and download related log reports for issue analysis. Log reports include CPU history
and utilization, crash and memory.
Chapter 44 Maintenance
current configuration on the Switch.
XGS2210 Series User's Guide
425