ZyXEL Communications XGS2210-28 User Manual page 111

Figure 86 Advanced Application > VLAN > VLAN Detail (Stacking mode)
The following table describes the labels in this screen.
Table 43 Advanced Application > VLAN > VLAN Detail
LABEL DESCRIPTION
VLAN Status Click this to go to the VLAN Status screen.
VID This is the VLAN identification number that was configured in the Static VLAN screen.
Slot (Stacking 'Slot' refers to a Switch in the 'virtual chassis' stack. This field displays the slot ID of the stacked
mode) Switch.
Port Number This column displays the ports that are participating in a VLAN. A tagged port is marked as T, an
untagged port is marked as U and ports not participating in a VLAN are marked as "–".
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
Status This field shows how this VLAN was added to the Switch.
Dynamic: using GVRP
Static: added as a permanent entry
Voice: manually added as a Voice VLAN
MVR: added via multicast VLAN registration
Private - manually added as a private VLAN (primary, isolated or community)
Private VLAN These fields show private VLAN information for the selected VLAN. See
Status for more information on private VLANs.
Primary This field shows the primary VLAN ID in the selected VLAN.
VLAN
Secondary This field shows the secondary VLAN ID in the selected VLAN.
VLAN
Type This field shows the type of private VLAN: Primary, Community or Isolated.
Port List This shows the ports mapped to the private VLAN using the Advanced Application > Private
VLAN or Advanced Application > VLAN > Static VLAN screen.
Change Pages Click Previous or Next to show the previous/next screen if all status information cannot be seen
in one screen.
Chapter 9 VLAN
XGS2210 Series User's Guide
111
Section 33.1 on page 333