ZyXEL Communications XGS2210-28 User Manual page 240

Figure 181 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering
(Stacking mode)
The following table describes the fields in the above screen.
Table 97 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering
LABEL DESCRIPTION
Active Select this option to enable MLD filtering on the Switch.
Slot (Stacking mode) This field appears only in stacking mode. Click the drop-down list to choose the slot number
of the Switch in a stack.
Port (Standalone or This field displays the port number. In stacking mode, the first number is the slot ID and the
stacking mode) second is the port number. * means all ports.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to
set the common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Group Limit Select this option to limit the number of multicast groups this port is allowed to join.
Max Group Num. Enter the number of multicast groups this port is allowed to join. Once a port is registered in
the specified number of multicast groups, any new MLD Report message is dropped on this
port.
Filtering Profile Select the name of the MLD filtering profile to use for this port. Otherwise, select Default to
prohibit the port from joining any multicast group.
You can create MLD filtering profiles in the Multicast > IPv6 Multicast > MLD Snooping-proxy
> Filtering > Filtering Profile screen.
Chapter 24 Multicast
XGS2210 Series User's Guide
240