Port Utilization - ZyXEL Communications XGS2210-28 User Manual

Table 226 Port Status: Port Details (continued)
LABEL
Length
Runt
Distribution
64
65-127
128-255
256-511
512-1023
1024-1518
Giant

57.2.2 Port Utilization

This screen displays the percentage of actual transmitted or received frames on a port as a percentage
of the Link speed.To view port utilization, click Management > Port Status > Port Utilization to see the
following screen. Alternatively, click Status from any Web Configurator screen and then the Port Status
link in the Quick Links section of the Status screen to display the Port Status screen and then click the
Utilization link tab.
Chapter 57 Port Status
DESCRIPTION
This field shows the number of packets received with a length that was out of range.
This field shows the number of packets received that were too short (shorter than 64 octets),
including the ones with CRC errors.
This field shows the number of packets (including bad packets) received that were 64 octets in
length.
This field shows the number of packets (including bad packets) received that were between 65
and 127 octets in length.
This field shows the number of packets (including bad packets) received that were between 128
and 255 octets in length.
This field shows the number of packets (including bad packets) received that were between 256
and 511 octets in length.
This field shows the number of packets (including bad packets) received that were between 512
and 1023 octets in length.
This field shows the number of packets (including bad packets) received that were between 1024
and 1518 octets in length.
This field shows the number of packets (including bad packets) received that were between 1519
octets and the maximum frame size.
The maximum frame size varies depending on your switch model.
XGS2210 Series User's Guide
494