ZyXEL Communications XGS2210-28 User Manual page 265

Figure 198 Advanced Application > IP Source Guard > IPv4 Source Guard Setup > Static Binding
(Stacking mode)
The following table describes the labels in this screen.
Table 109 Advanced Application > IP Source Guard > IPv4 Source Guard Setup > Static Binding
LABEL DESCRIPTION
ARP Freeze ARP Freeze allows you to automatically create static bindings from the current ARP entries
(either dynamically learned or static ARP entries) until the Switch's binding table is full.
Note: The ARP learning mode should be set to ARP-Request in the IP Application >
Condition All - Select this and click ARP Freeze to have the Switch automatically add all the current
ARP entries to the static bindings table.
Port List - Select this and enter the number of the port(s) (separated by a comma). ARP
entries learned on the specified port(s) are added to the static bindings table after you click
ARP Freeze.
VLAN List - Select this and enter the ID number of the VLAN(s) (separated by a comma). ARP
entries for the specified VLAN(s) are added to the static bindings table after you click ARP
Freeze.
Static Binding
MAC Address Enter the source MAC address in the binding.
IP Address Enter the IP address assigned to the MAC address in the binding.
VLAN Enter the source VLAN ID in the binding.
Port (Standalone or Specify the port(s) in the binding. If this binding has one port, select the first radio button and
stacking mode) enter the port number in the field to the right. In stacking mode, the first field is the slot ID
and the second field is the port number. If this binding applies to all ports, select Any.
Add Click this to create the specified static binding or to update an existing one.
Cancel Click this to reset the values above based on the last selected static binding or, if not
applicable, to clear the fields above.
Clear Click this to clear the fields above.
Index This field displays a sequential number for each binding.
MAC Address This field displays the source MAC address in the binding.
Chapter 26 IP Source Guard
ARP Setup > ARP Learning screen before you use the ARP Freeze feature.
XGS2210 Series User's Guide
265