ZyXEL Communications XGS2210-28 User Manual page 387

Figure 297 Advanced Application > OAM > OAM Configuration (Stacking mode)
The following table describes the labels in this screen.
Table 170 Advanced Application > OAM > OAM Configuration
LABEL DESCRIPTION
Active Select this option to enable Ethernet OAM on the Switch.
Slot (Stacking This field appears only in stacking mode. Click the drop-down list to choose the slot number of
mode) the Switch in a stack.
Port This field displays the Switch's port number. In stacking mode, the first number is the slot ID and
the second is the port number. * means all ports.
* Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to enable Ethernet OAM on this port.
Clear this check box to disable Ethernet OAM on the port.
Chapter 38 OAM
XGS2210 Series User's Guide
387