ZyXEL Communications XGS2210-28 User Manual page 385

Table 169 Advanced Application > OAM Status > OAM Details (continued)
LABEL DESCRIPTION
Discovery state This field indicates the state in the OAM discovery process. OAM-enabled devices use this
process to detect each other and to exchange information about their OAM configuration
and capabilities. OAM discovery is a handshake protocol.
Fault: One of the devices is transmitting OAM PDUs with link fault information, or the interface is
not operational.
Active Send Local: The port is in active mode and is trying to see if the remote device supports
OAM.
Passive Wait: The port is in passive mode and is waiting for the remote device to begin OAM
discovery.
Send Local Remote: This state occurs in the following circumstances.
• The port has discovered the remote device but has not accepted or rejected the
connection yet.
• The port has discovered the remote device and rejected the connection.
Send Local Remote OK: The port has discovered the remote device and has accepted the
connection. In addition, the remote device has not accepted or rejected the connection
yet, or the remote device has rejected the connected.
Send Any: The port and the remote device have accepted the connection. This is the
operating state for OAM links that are fully operational.
Statistics
This section displays the number of OAM packets transferred on the port of the Switch.
Information This field displays the number of OAM PDUs sent on the port.
OAMPDU Tx
Information This field displays the number of OAM PDUs received on the port.
OAMPDU Rx
Event Notification This field displays the number of unique or duplicate OAM event notification PDUs sent on the
OAMPDU Tx port.
Event Notification This field displays the number of unique or duplicate OAM event notification PDUs received on
OAMPDU Rx the port.
Loopback Control This field displays the number of loopback control OAM PDUs sent on the port.
OAMPDU Tx
Loopback Control This field displays the number of loopback control OAM PDUs received on the port.
OAMPDU Rx
Variable Request This field displays the number of OAM PDUs sent to request MIB objects on the remote device.
OAMPDU Tx
Variable Request This field displays the number of OAM PDUs received requesting MIB objects on the Switch.
OAMPDU Rx
Variable Response This field displays the number of OAM PDUs sent by the Switch in response to requests.
OAMPDU Tx
Variable Response This field displays the number of OAM PDUs sent by the remote device in response to requests.
OAMPDU Rx
Unsupported This field displays the number of unsupported OAM PDUs sent on the port.
OAMPDU Tx
Unsupported This field displays the number of unsupported OAM PDUs received on the port.
OAMPDU Rx
Chapter 38 OAM
XGS2210 Series User's Guide
385