ZyXEL Communications XGS2210-28 User Manual page 105

Table 40 Basic Setting > DNS (continued)
LABEL DESCRIPTION
Server Address Enter a domain name server IPv6/IPv4 address in order to be able to use a domain name
instead of an IP address.
Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the nonvolatile memory when you are done configuring.
Cancel Click Cancel to reset the fields to your previous configuration.
Domain Name Server Table
Index This field displays priority of the DNS server address.
Server Address This field displays the IP address of the DNS server.
Source This field displays whether the DNS server address is configured manually (Static) or
obtained automatically using DHCPv4/DHCPv6 (Dynamic).
Chapter 8 Basic Setting
XGS2210 Series User's Guide
105