ZyXEL Communications XGS2210-28 User Manual page 238

Figure 179 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > VLAN > Port Role
Setting (Stacking mode)
The following table describes the fields in the above screen.
Table 96 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Port Role Setting
LABEL DESCRIPTION
MLD Snooping-proxy Select the VLAN ID for which you want to configure a port's MLD snooping-proxy settings.
VLAN ID
Slot (Stacking mode) This field appears only in stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
Port (Standalone or This field displays the port number. In stacking mode, the first number is the slot ID and the
stacking mode) second is the port number. * means all ports.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first
to set the common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Port Role A port on the Switch can be either a Downstream port or Upstream port in MLD. A
downstream port connects to MLD hosts and acts as a multicast router to send MLD
queries and listen to the MLD host's Report and Done messages. An upstream port
connects to a multicast router and works as a host to send Report or Done messages
when receiving queries from a multicast router.
Otherwise, select None if the port is not joining a multicast group or does not belong to
this VLAN.
Chapter 24 Multicast
XGS2210 Series User's Guide
238