Boring The Through Hole; Machining A Rectangular Pocket (Mdi Mode Of Operation); Figure 34: Example Workpiece - Machining A Rectangular Pocket - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

9
9.5.2

Boring the through hole

9.6 Machining a rectangular pocket (MDI mode of
operation)
Machine the rectangular pocket in MDI mode of operation. The values to be
entered into the input fields can be taken directly from the dimensioned production
drawing.
Figure 34: Example workpiece – machining a rectangular pocket
Activation
158
Quick Start | Machining a through hole (manual operation)
On the machine tool, insert the Ø 19.8 mm drill into the
spindle
Tap Tools on the status bar
The Tools dialog box appears
Tap Drill 19.8
Tap Confirm
The associated tool parameters are applied automatically
The Tools dialog box is closed
On the product, set a spindle speed of 400 rpm
Bore the through hole and retract the spindle
You have successfully bored the through hole
Tap MDI in the main menu
The user interface for MDI mode is displayed
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020