Cylinder Head Assembly - Honda V65 MAGNA Shop Manual

(;j)
V65MAGNA
CYLINDER HEAD ASSEMBLY
NOTE:
Install new valve stem seals when assembl ing.
Use valve guide driver 07742-0010100.
Lubricate each valve stem with molybdenum
disulfide grease and insert the valve into the valve
guide. To avoid damage to the stem seal, turn the
valve slowly when inserting.
Install the valve springs and retainers. The springs
tightly wound coils should face toward the head.
VALVE STEM SEAL
CYLINDER HEAD/VALVE
RETAINER
VALVE COTTERS
Install the valve cotters.
CAUTION:
To prevent loss of tension, do not com-
press the valve spring more than necessary
to install the valve keepers.
Position the large retainer on the compres-
sor attachment, so the compressor will not
touch the cylinder head.
Tap the valve stems gently with a soft hammer to
firmly seat the cotters.
NOTE:
Support the cylinder head above the work
bench surface to prevent possible valve
damage.
VALVE SPRING COMPRESSOR
07757-0010000
Date of Issue: Dec, 1982
© HONDA MOTOR CO., LTD.
145 10-1