Set Port Mirror Command; Clear Port Mirror Command; Set Port Vlan Command - Avaya P130 User Manual

Set port mirror Command

Use the set port mirror command to define a port mirroring source-
destination pair in the switch.
The syntax for this command is:
set port mirror source-port <mod_num>/<port_num> mirror-port
<mod_num>/<port_num> sampling {always | disable} direction
{rx| tx | both}
always
disable
rx
tx
both
Example:
P130-1# set port mirror source-port 1/9 mirror-port 1/10
sampling always direction both
Mirroring both Rx and Tx packets from port 1/9 to port 1/10 is
Enabled

Clear port mirror Command

Use the clear port mirror command to cancel port mirroring.
The syntax for this command is:
clear port mirror <source-module>/<source-port>/<dest-
module>/<dest-port>
Example:
P130-1# clear port mirror 1/2/1/4
this command will delete the port mirror entry
- do you want to continue (Y/N)?
Mirroring packets from port 1/2 to port 1/4 is cleared

Set port vlan Command

See Set port vlan Command on page 90.
Avaya P130 User's Guide
Keyword to activate the port mirroring entry
Keyword to change the status of the port mirroring entry to
"not ready"
Keyword to copy only incoming traffic
Keyword to copy only outgoing traffic
Keyword to copy both incoming and outgoing traffic
y
Chapter 6 Avaya P130 CLI
79