Chapter 6
Avaya P130 CLI
Set qos trust Command
Use the set qos trust command to configure which of the incoming packet's
priority parameters should be considered when determining the new assigned
priority. You can configure the P130 to trust either the cos (the 802.1p priority), or
the dscp (the DSCP value). The default value is trust-cos.
The syntax for this command is:
set qos trust {untrusted
cos-dscp}
Note: The untrusted and trust-cos-dscp options are not operational on the P130.
Example:
P130-N(super)#
IP port range upper limit for Command
Use the ip port range upper limit for command to determine the valid
port range in a list.
The syntax for this command is:
ip port range upper limit for <lower_limit>
Example:
P130-N(super)# ip port range upper limit for 2048
Upper limit options:
2048,2049,2051,2055,2063,2079,2111,2175,2303,2559,3071,4095
126
| trust-cos | trust-dscp | trust-
set qos trust dscp
Avaya P130 User's Guide