Clear Snmp Trap Command - Avaya P130 User Manual

Clear snmp trap Command

Use the clear snmp trap command to clear an entry from the SNMP trap
receiver table.
The syntax for this command is:
clear snmp trap {<rcvr_addr>|all}
<rcvr_addr>
all
Example:
P130-1# clear snmp trap 192.122.173.82
SNMP trap receiver deleted.
P130-1#
Avaya P130 User's Guide
IP address or IP alias of the trap receiver (the SNMP management
station) to clear.
Keyword that specifies every entry in the SNMP trap receiver table
Chapter 6 Avaya P130 CLI
117