Table of Contents
Advertisement
Show running-config Command
Use the show running-config command to display the currently running
configuration of the module.
This command applies to Policy only.
The syntax for this command is:
show running-config
Example:
P130-N>
! Avaya P130 Switch-Multilayer Policy configuration
! version 2.9.1
P130-N>
Show startup-config Command
Use the show startup-config command to display the startup configuration of
the module.
This command applies to Policy only.
The syntax for this command is:
show startup-config
Example:
P130-N> show startup-config
! Avaya P130 Switch-Multilayer Policy configuration
! version 2.9.1
P130-N> P130-1(super)#
Show stack-config Command
Use the show stack-config command to display the stack configuration.
The syntax for this command is:
show stack-config
Example:
P130-N> show stack-config
!#*******************************************************
!# Upload time:
!# System description:
!# IP address, netmask:
!# Master module #:
Avaya P130 User's Guide
show running-config
11:11:33 31 JAN 2001 GMT
Avaya Stack of P130 workgroup switches
149.49.48.109, 255.255.255.0
1
Chapter 6
Avaya P130 CLI
55
Advertisement
Table of Contents
