Show Port Flowcontrol Command - Avaya P130 User Manual

Show port flowcontrol Command

Use the show port flowcontrol command to display per-port status
information related to flow control.
The syntax for this command is:
show port flowcontrol [mod_num/port_num]
mod_num
port_num
Example:
To display the flow-control port status and statistics:
Console> show port flowcontrol
Port
-----
1/2
1/3
etc.
Output Fields:
Port
Send- Flowcontrol-Admin
Send- Flowcontrol-Oper
Receive- Flowcontrol-Admin Receive flow-control administration. Possible
Receive- Flowcontrol-Oper
Avaya P130 User's Guide
Module number (optional).
Number of the port on the module (optional). If you
do not specify a number, filters configured on all the
ports on the module are shown.
Send-Flowcontrol
Admin Oper
------- ------
off off
on on
Field
Module and port number
Send flow-control administration. Possible
settings:
- on indicates the local port is capable of sending a
flow control advertisement to the far end;
- off indicates the local port is not capable of
sending a flow control advertisement to the far end
Send flow-control operation mode
settings:
- on indicates the local port can request the far end
to send flow control advertisement;
- off indicates the local port cannot request the far
end to send flow control advertisement
Receive flow-control operation mode
Chapter 6
Receive-Flowcntl
Admin Oper
------- -----
off off
off off
Description
Avaya P130 CLI
67