Table of Contents
Advertisement
Chapter 4
Installation and Setup
Rack Mounting
The P130 case fits in most standard 19-inch racks. P130 is 2U (88mm, 3.5") high.
Place the P130 in the rack as follows:
1
Snap open the hinged ends of the front panel to reveal the fixing holes.
2
Insert the unit into the rack. Ensure that the four P130 screw holes are aligned
with the rack hole positions as shown in Figure 4.6.
Figure 4.6
3
Secure the unit in the rack using the screws. Use two screws on each side. Do
not overtighten the screws.
4
Snap closed the hinged ends of the front panel.
5
Ensure that ventilation holes are not obstructed.
22
Avaya P130 Rack Mounting
Avaya P130 User's Guide
Advertisement
Table of Contents
