Table of Contents
Advertisement
Chapter 6
Avaya P130 CLI
Show tftp download software status Command
Use the show tftp download software status commands to display the
status of the current TFTP Device Manager S/W (Embedded Web) download
process into the device.
The syntax for this command is:
show tftp download software status [<mod_num>]
<mod_num>
Example:
P130-N> show tftp download software status
Module
Source file
bsp_64115/vxWorks.
st_appl.bout.burn
Destination file : p130
Host
Running state
Failure display
Last warning
Copy stack-config tftp Command
Use the copy stack-config tftp command to upload the stack-level
parameters from the current NVRAM running configuration into a file via TFTP.
The syntax for this command is:
copy stack-config tftp <filename> <ip>
<filename>
<ip>
Example:
P130-1# copy stack-config tftp c:\conf.cfg 149.49.36.200
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show tftp upload status' command
58
Module number
: 1
: /home2/users/vkopilev/work/P130/brs_integr/
: 149.49.39.76
: Idle
: (null)
: No-warning
File name (full path)
The IP address of the host
Avaya P130 User's Guide
Advertisement
Table of Contents
