Set Port Trap Command; Set Port Vlan Command - Avaya P333T User Manual

Chapter 6 Cajun Campus CLI – Layer 2
Example:
Cajun_P330-N# set port name 1/21 arthur
Port 1/21 name set.

Set port trap Command

Use the set port trap command to enable/disable generic SNMP uplink/
downlink traps from a port.
The syntax for this command is:
set port trap <mod_num>/<port_num> {enable|disable}
Example:
Cajun_P330-N# set port trap 1/21 enable
Port 1/21 up/down trap enabled.

Set port vlan Command

Use the set port vlan command to set the Port's VLAN ID (PVID). The VLAN
number must be within the range 1 to 3071.
The syntax for this command is:
set port vlan <VLAN_num> <mod_num>/<port_num>
VLAN_num
Example:
To set VLAN 850 to include ports 4 through 7 on module 3.
Cajun_P330-N# set port vlan 850 3/4-7
VLAN 850 modified.
VLAN Mod/Ports
---- -----------------------
850 3/4-7
88
Number between 1 and 3071, identifying the VLAN.
Avaya P333T User's Guide