Security Settings; System Management Settings - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual

Security Settings

The following table describes the security settings.
Table 101. Security settings
Feature
802.1X
MAC ACL
IP ACL
IPv6 ACL
Password control access
Management security
Port MAC lock down

System Management Settings

The following table describes the system management settings.
Table 102. System management settings
Feature
Multi-session web connections
SNMPv1/v2
SNMPv3
Time control
LLDP/LLDP-MED
Logging
MIB support
Smart Control Center
Statistics
Sets Supported
All ports
100 (shared with IP and IPv6
ACLs)
100 (shared with MAC and IPv6
ACLs)
100 (shared with IP ACL and MAC
ACL)
1
1 profile with 20 rules for
HTTP/HTTPS/SNMP access to
allow/deny an IP address/subnet
All ports
Sets Supported
4
Max 5 community entries
1 (Local or SNTP)
All ports
3 (Memory/Flash/Server)
1
N/A
N/A
Specifications and Default Settings
441
Default
Disabled
All MAC addresses allowed
All IP addresses allowed
All IP addresses allowed
Idle timeout = 5 mins.
Password = password
All IP addresses allowed
Disabled
Default
Enabled
Enabled (read, read/write
communities)
Local Time enabled
Enabled
Memory Log enabled
Disabled
Enabled
N/A