NETGEAR XS708T User Manual page 68

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
The default password is password.
The System Information page displays.
5. Select System > Management > Green Ethernet > Green Ethernet Details.
6. From the Interface menu, select the interface.
7. Use the EEE Admin mode menu to enable or disable this option on the port.
With EEE mode enabled, the port transitions to low power mode during a link idle
condition. The default value is Disabled. If EEE Admin Mode is not supported, N/A is
displayed.
8. In the EEE Transmit Idle Time field, enter the time after which switch transitions to the LPI
state.
The range is 600 to 4294967295. The default value is 600.
9. In the EEE Transmit Wake Time field, enter the time that the switch must wait before it
transitions to the active state after it receives a packet for transmission.
The range is 8 to 65535. The default value is 17.
10. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
11. To refresh the page, click the Update button.
12. To clear the configuration, resetting all statistics for the selected interface to default values,
click the Clear button.
Configure System Information
68