NETGEAR XS708T User Manual page 258

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
6. Select the check box next to the policy name.
7. In the Policy Name field, specify the new name.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Change the Policy Attributes for an Existing DiffServ Policy

To change the policy attributes for an existing DiffServ policy:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Policy Configuration.
The Policy Configuration page displays.
6. Click the policy name, which is a hyperlink.
The page on which you can change the policy attributes displays.
7. Change the policy attributes as needed.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Remove a Class From an Existing DiffServ Policy

To remove a class from an existing DiffServ policy:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
Configure Quality of Service
258
Change the Default IP Address of the