Configure A Mac-Based Vlan - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
14. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the nonconfigurable fields.
Table 32. Nonconfigurable fields on the PVID Configuration page
Field
Current Ingress Filtering
Untagged VLANs
Tagged VLANs
Forbidden VLANs
Dynamic VLANs

Configure a MAC-Based VLAN

The MAC-Based VLAN feature allows incoming untagged packets to be assigned to a VLAN
and thus classify traffic based on the source MAC address of the packet.
You define a MAC-to-VLAN mapping by configuring an entry in the MAC-to-VLAN table. An
entry is specified through a source MAC address and the desired VLAN ID. The
MAC-to-VLAN configurations are shared across all ports of the device (that is, a system-wide
table exists with MAC address–to–VLAN ID mappings).
When untagged or priority-tagged packets arrive at the switch and entries exist in the
MAC-to-VLAN table, the source MAC address of the packet is looked up. If an entry is found,
the corresponding VLAN ID is assigned to the packet. If the packet is already priority tagged
it maintains this value. Otherwise, the priority is set to zero. The assigned VLAN ID is verified
against the VLAN table. If the VLAN is valid, ingress processing on the packet continues.
Otherwise, the packet is dropped. This implies that the user is allowed to configure a MAC
address mapping to a VLAN that was not created on the system.
Add a MAC-Based VLAN

To add a MAC-based VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
Description
Displays whether ingress filtering is enabled for the interface.
The number of untagged VLANs for the interface.
The number of tagged VLANs for the interface.
The number of forbidden VLANs for the interface.
The number of dynamically added VLANs for the interface.
Configure Switching
133
Change the Default IP Address of the