Enable Or Disable A Multicast Router On Interfaces - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual

Enable or Disable a Multicast Router on Interfaces


To enable or disable a multicast router on interfaces:
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
13. Launch a web browser.
14. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
15. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
16. Select Switching> Multicast > MLD Snooping > Multicast Router Configuration.
17. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the port, or type
the port number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the heading
row.
18. From the Multicast Router menu, select to enable or disable the multicast router for the
selected interfaces.
19. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Change the Default IP Address of the
Configure Switching
184