Set Up Traffic Control; Manage Mac Filtering - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
The following table describes the fields on the Client Summary page.
Table 78. Client Summary information
Field
Port
User Name
Supplicant Mac Address
Session Time
Filter ID
VLAN ID
VLAN Assigned
Session Timeout
Termination Action

Set Up Traffic Control

From the Traffic Control menu, you can configure MAC filters, storm control, port security,
protected port, and private VLAN settings.

Manage MAC Filtering

Use the MAC Filter Configuration page to create MAC filters that limit the traffic allowed into
and out of specified ports on the switch.
Create a MAC Filter

To create a MAC filter:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
Description
The port to be displayed.
The user name representing the identity of the supplicant device.
The supplicant's device MAC address.
The time since the supplicant logged in seconds.
The policy filter ID assigned by the authenticator to the supplicant device.
The VLAN ID assigned by the authenticator to the supplicant device.
The reason for the VLAN ID assigned by the authenticator to the supplicant device.
The session time-out imposed by the RADIUS server on the supplicant device.
The termination action imposed by the RADIUS server on the supplicant device.
Manage Device Security
299
Change the Default IP Address of the