NETGEAR XS708T User Manual page 307

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
View Learned MAC Addresses and Convert Them to Static MAC Addresses
Use the Security MAC Address page to convert a dynamically learned MAC address to a
statically locked address.

To view learned MAC addresses for an individual interface or LAG and convert these
MAC addresses to static MAC addresses:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Traffic Control > Port Security > Port Security Configuration.
The Port Security Configuration page displays.
6. Make sure that port security is globally enabled.
For more information, see
7. Select Security > Traffic Control > Port Security > Interface Configuration.
The Interface Configuration page displays.
8. Make sure that port security is enabled for the individual interface for which you want to view
the dynamically learned MAC addresses.
For more information, see
9. Select Security > Traffic Control > Port Security > Security MAC Address.
10. From the Port List menu, select the individual interface.
Configure the Global Port Security Mode
Configure a Port Security Interface
Manage Device Security
307
Change the Default IP Address of the
on page 304.
on page 305.